Rystiono 2.0E

Ini nih hasil dmes komputerku di Linux….

Linux version 2.4.29-IWAN (rystiono@oke.com) (gcc version 3.3.4) #6 Thu Jan 20 16:30:37 PST 2005
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000d8000 - 00000000000de000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000000f7f0000 (usable)
BIOS-e820: 000000000f7f0000 - 000000000f7f8000 (ACPI data)
BIOS-e820: 000000000f7f8000 - 000000000f800000 (ACPI NVS)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
247MB LOWMEM available.
On node 0 totalpages: 63472
zone(0): 4096 pages.
zone(1): 59376 pages.
zone(2): 0 pages.
Kernel command line: BOOT_IMAGE=Linux ro root=301
Initializing CPU#0
Detected 1700.045 MHz processor.

Console: colour dummy device 80×25
Calibrating delay loop… 3400.09 BogoMIPS
Memory: 247924k/253888k available (1831k kernel code, 5576k reserved, 607k data, 120k init, 0k highmem)
Dentry cache hash table entries: 32768 (order: 6, 262144 bytes)
Inode cache hash table entries: 16384 (order: 5, 131072 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 16384 (order: 4, 65536 bytes)
Page-cache hash table entries: 65536 (order: 6, 262144 bytes)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 64K (64 bytes/line)
CPU: After generic, caps: 0183fbff c1c7fbff 00000000 00000000
CPU: Common caps: 0183fbff c1c7fbff 00000000 00000000
CPU: AMD Athlon(tm) stepping 01
Enabling fast FPU save and restore… done.
Checking ‘hlt’ instruction… OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 2.10 entry at 0xfdaf1, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Using IRQ router default [1106/3177] at 00:11.0
PCI: Hardcoded IRQ 14 for device 00:11.1
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
VFS: Disk quotas vdquot_6.5.1
Journalled Block Device driver loaded
vesafb: framebuffer at 0xd8000000, mapped to 0xd000d000, size 1536k
vesafb: mode is 1024×768x8, linelength=1024, pages=9
vesafb: protected mode interface info at c000:3fdb
vesafb: scrolling: redraw
Console: switching to colour frame buffer device 128×48
fb0: VESA VGA frame buffer device
pty: 512 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0×03f8 (irq = 4) is a 16550A
Real Time Clock Driver v1.10f
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 7777K size 1024 blocksize
loop: loaded (max 8 devices)
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 00:11.1
PCI: Hardcoded IRQ 14 for device 00:11.1
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci00:11.1
ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hdaMA, hdbio
ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdcMA, hddMA
hda: SAMSUNG SV0432A, ATA DISK drive
blk: queue c03ad460, I/O limit 4095Mb (mask 0xffffffff)
hdc: WDC AC21200H, ATA DISK drive
hdd: SAMSUNG CD-ROM SC-152G, ATAPI CD/DVD-ROM drive
blk: queue c03ad8b4, I/O limit 4095Mb (mask 0xffffffff)
ide0 at 0×1f0-0×1f7,0×3f6 on irq 14
ide1 at 0×170-0×177,0×376 on irq 15
hda: attached ide-disk driver.
hda: host protected area => 1
hda: 8421840 sectors (4312 MB) w/220KiB Cache, CHS=524/255/63, UDMA(33)
hdc: attached ide-disk driver.
hdc: 2503872 sectors (1282 MB) w/128KiB Cache, CHS=2484/16/63, DMA
hdd: attached ide-cdrom driver.
hdd: ATAPI 52X CD-ROM drive, 128kB Cache, DMA
Uniform CD-ROM driver Revision: 3.12
Partition check:
hda: hda1 hda2
hdc: [PTBL] [621/64/63] hdc1 hdc2
SCSI subsystem driver Revision: 1.00
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
md: linear personality registered as nr 1
md: raid0 personality registered as nr 2
md: raid1 personality registered as nr 3
md: raid5 personality registered as nr 4
raid5: measuring checksumming speed
8regs : 1002.800 MB/sec
32regs : 671.600 MB/sec
pII_mmx : 1637.200 MB/sec
p5_mmx : 2092.000 MB/sec
raid5: using function: p5_mmx (2092.000 MB/sec)
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun …
md: … autorun DONE.
LVM version 1.0.8(17/11/2003)
Initializing Cryptographic API
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 32768)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
FAT: bogus logical sector size 0
UMSDOS: msdos_read_super failed, mount aborted.
FAT: bogus logical sector size 0
FAT: bogus logical sector size 0
reiserfs: found format “3.6″ with standard journal
reiserfs: checking transaction log (device ide0(3,1)) …
for (ide0(3,1))
ide0(3,1):Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly.
Freeing unused kernel memory: 120k freed
Adding Swap: 251748k swap-space (priority -1)
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 196M
agpgart: Unsupported Via chipset (device id: 3205), you might want to try agp_try_unsupported=1.
agpgart: no supported devices found.
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
reiserfs: found format “3.6″ with standard journal
reiserfs: checking transaction log (device ide0(3,2)) …
for (ide0(3,2))
ide0(3,2):Using r5 hash to sort names
reiserfs: found format “3.6″ with standard journal
reiserfs: checking transaction log (device ide1(22,1)) …
for (ide1(22,1))
ide1(22,1):Using r5 hash to sort names